LAN Diagram

Bird's eyeview

We design this room to network all the computers.

In the diagram we use different kind of repeaters like switch, and router.

The switch is a connectivitydevice that connects network segments.that processes and routes data at the Data link layer(layer 2) of the OSI model. Switches that additionally process data at the Network layerayer 3 and above) are often referred to as Layer 3 switches or Multilayer switches.Router connect two or more logical subnets which do not necessarily map one-to-one to the physical interfaces of the router. We use the router to connect the two switches together to network all their respected workstations. UTP cable was the wire we used to connect the computer to the connectivity device.

Man's eyeview

In our diagram we specify the connection of the ceiling, floor and wall. We have two switch and one router. The half side of the room is connected in Switch 1 and the other half side is connected to another switch that we can call as Switch 2 and that both switch are connected in one router. The router will avoid the collision in the network.
The cable are protected in a race way for those that are located in the ceiling and wall, and for the floor it is covered with alluminum.


The switch that we used is a two 16 ports switch(refer to hardware pricing). The router is Broadband Router with 4-Port Switch.